Innovative pickling solution continuous pickling line
/ Continuous pickling line
The pickling section is divided into three sections, and the
pickling tank is made of PPH by welding. The bottom of the tank and
the contact part of the strip steel are laid with andesite. The
internal width is 1.7m, and the thickness of the main PPH plate is
40mm. Respectively by pickling tank, circulation system, heating
system, detection system. The tank is provided with acid inlet,
liquid return port, sewage outlet. The tank cover is PPH structure,
double layer structure, sealed with the tank by water seal
structure; The tank cover is provided with an acid mist exhaust
duct, through which the waste acid mist is sent to the acid
regeneration system for treatment.
Cleaning section stage 5 stages
Length each section is about 2500mm
Internal width about 1800 mm
Tank cover PPH
Injection beams 25pcs
Desalinized water spray anti-rust device
Injection beams 25pcs
Basic Parameter| Cleaning section stage | 5 stages |
| Length each section | 2500mm |
| Internal width | about 1800 mm |
| Tank cover | PPH |
| Injection beams | 25pcs |
| Desalinized water spray | anti-rust device |
| Injection beams | 25pcs |
Services Commitments:
No matter what kinds of products and services, only condition that
being sold by JJRS, either production line, single equipment,
component, spare parts, or technology service etc., perfect and
timely after-sale service will surely be provided. Which is to say,
when you use the high quality products of us, simultaneously you
will enjoy perfect and timely after-sale service.
For this aim, we formally announce the following commitment:
1.Quality warranty: 1 year, within this period, you can enjoy
technical supports from our appointed engineers; meanwhile, free
repair and replacement will be provided by our technicians
regarding the defects of equipment design, manufacture and quality;
2.Lifetime maintenance: we will provide lifetime maintenance
service for all sold products, at the same time, provide spare
parts at the cost prices;
3.Service visit periodically: even after warranty, periodical
service visits will be arranged for routine checks, with the object
to know the operation status and maintenance of equipments, and
instruct if necessary;
4.Failure treatment: if any failure occurs regarding equipment,
when being acknowledged by the customer, reply will be made within
6 hours, technicians will be sent to the site within 24 hours if
necessary;
5.Spare parts: considering the easy consuming components and parts
in the production process, spare parts warehouse has already set
up, which can response the needs of clients in time;
6.Value added services: we will help clients to update the relevant
technologies associated with our products.
